Stepping Motor α STEP
AZ Series Axes Driver
MECHATROLINK-Ⅲ Compatible

스테핑 모터

MECHATROLINK-III 에 대응한 2축, 3축, 4축에 접속 가능한 다축 드라이버니다.__RCMS_CONTENT_BOUNDARY__「Open Loop 제어」와 「Closed Loop 제어」의 장점을 함께 가지고 있으며, 자체 제어를 하는, Stepping Motor의 기본 Motor입니다.__RCMS_CONTENT_BOUNDARY__Batteryless 다회전 앱솔루트 센서를 모터에 탑재하고 있습니다. 배터리 불필요, 원점 복귀 불필요, 외부 센서 불필요 등 다양한 장점이 있습니다.__RCMS_CONTENT_BOUNDARY__모터의 위치, 속도, 부하 등의 기본적인 정보 이외에도 온도와 동작량등까지 모니터 할 수 있습니다. 설비의 상태 감시, 예지보전 등에 활용하십시오.__RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY__

Item Specifications MECHATROLINK communications Protocol MECHATROLINK-Ⅲ Baud Rate 100Mbps Transmission cycle 0.5ms, 1.0ms, 2.0ms, 4.0ms Communication cycle 0.5ms to 32ms (increments of 0.5ms) Node address 03h to EFh (initial value: 03h) ※AS for the master controller, extended address-compliant is required. Command method (Operation function) Interpolation feed (INTERPOLATE), Positioning (POSING), Constant-speed feed (FEED), Positioning at Constant-speed by external input (EX_FEED), Positioning by external input (EX_POSING), Return-to-home (ZRET) Monitor Command position, Command speed, Feedback position, Feedback speed, Alarm code, Status of driver I/O signals Input signal Input: 4 points (Signal allocation can be changed) Forward drive prohibition Input (FW-BLK), Reverse drive prohibition Input(RV-BLK), Homing deceleration switch Input (DEC), Latch Input1 (EXT1) Output signal Output: 3 points (Signal allocation can be changed) Alarm Output (ALM-B), Driver ready completed Output (READY), Motor operating Output (MOVE) Power supply Main power supply DC24V±10％ or DC48V±10% Power supply current capacity: 7.0A Control power supply DC24V±10% Power supply current capacity 2-axis: 1.0A, 3-axis: 1.25A, 4-axis: 1.5A Operating ambient temperature and humidity Ambient temperature : 0 to+50°C (+32 to +122°F) (non-freezing) Humidity: 85% or less (non-condensing)