Stepping Motor α STEP
AZ Series AC Power Input Driver
MECHATROLINK-Ⅲ Compatible

스테핑 모터

MECHATROLINK-Ⅲ를 지원하는 Stepping Driver 니다.__RCMS_CONTENT_BOUNDARY__「Open Loop 제어」와 「Closed Loop 제어」의 장점을 함께 가지고 있으며, 자체 제어를 하는, Stepping Motor의 기본 Motor입니다.__RCMS_CONTENT_BOUNDARY__Batteryless 다회전 앱솔루트 센서를 모터에 탑재하고 있습니다. 배터리 불필요, 원점 복귀 불필요, 외부 센서 불필요 등 다양한 장점이 있습니다.__RCMS_CONTENT_BOUNDARY__모터의 위치, 속도, 부하 등의 기본적인 정보 이외에도 온도와 동작량등까지 모니터 할 수 있습니다. 설비의 상태 감시, 예지보전 등에 활용하십시오.__RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY__

Item Specifications MECHATROLINK communications Protocol MECHATROLINK-Ⅲ Baud Rate 100Mbps Transmission cycle 0.5ms to 4.0ms (increments of 0.5ms) Communication cycle 0.5ms to 32ms (increments of 0.5ms) Node address 03h to EFh (initial value: 03h) Command method (Operation function) Interpolation feed (INTERPOLATE), Positioning (POSING), Constant-speed feed (FEED), Positioning at Constant-speed by external input (EX_FEED), Positioning by external input (EX_POSING), Return-to-home (ZRET) Monitor Command position, Command speed, Feedback position, Feedback speed, Alarm code, Status of driver I/O signals Input signal Input: 4 points (Signal allocation can be changed) Forward drive prohibition Input (FW-BLK), Reverse drive prohibition Input(RV-BLK), Homing deceleration switch Input (DEC), Latch Input1 (EXT1) Output signal Output: 3 points (Signal allocation can be changed) Alarm Output (ALM-B), Driver ready completed Output (READY), Motor operating Output (MOVE) Power supply Main power supply Single-phase 100-120V -15 to +6%（50/60Hz） ： 2.7～6.4A Single-phase 200-240V -15 to +6%（50/60Hz） ： 1.6～3.9A Three-phase 200-240V -15 to +6%（50/60Hz） ： 1.0～2.3A Control power supply DC24V±5% Power supply current capacity ： 0.25A（0.5A for motor with electromagnetic brake.） Operating ambient temperature and humidity Ambient temperature : 0 to+55°C (+32 to +131°F) (non-freezing) Humidity ： 85% or less (non-condensing)