- A-LINK V2.0 + MECHATROLINK-Ⅱ Dual-field-bus-master PCI Board
-
Master 컨트롤러
Category：
（★） -
MECHATROLINK Spec
M-II M-III M-4
- The both of A-Link and MECHATROLINK-II capabilities fabricated on a half-hight PCI board.
- Further less-wiring in equipment.
- Distributed High-speed Control
- allows 2016 I/O points maximum with 0.96ms high speed scanning on A-Link and 16-axis with 2ms or 30-axis 4ms control on MECHATROLINK-Ⅱ simultaneously. - Just a board can control maximum 30 axes servo-driver units or manage maximum 15 axes independent linear interpolation motion, positioning and changing speed/destination after moving (except interpolated axis).
- Embedding bundled software makes it possible to realize applications easier on PC platforms.
Specifications
| Network | A-Link | MECHATROLINK-Ⅱ |
|---|---|---|
| Transmission Speed | 6 or 12 Mbps | 10 Mbps |
| Maximum Transmission Length | 200 m (6 Mbps) or 100 m (12 Mbps) - extension available with HUB | 50 m - 50 m maximum with repeater |
| Available Nodes | 63 slave nodes maximum | 15 slave nodes max. or 30 max. with repeater |
| Connection (Transmission Cable) | Multi-drop type (pulse transformer isolated) – specific shielded cable (i.e. shielded Ethernet cable equal or more than category-3) | Multi-drop type (pulse transformer isolated) – MECHATROLINK-Ⅱ specific cable (i.e. shielded and twisted-pair cable with characteristic impedance 130 ohm) |
| Maximum I/O points | 2016 points (1008 for input and 1008 for output) | N/A |
| Transmission Cycle-time | Full-duplex: 0.955 ms / 2016 points (63 nodes / 12 Mbps) Half-duplex: 1.859 ms / 2016 points (63 nodes / 12 Mbps) |
1 ms (LT or EQ 6 axes), 2 ms (7-16 axes), 4 ms (17-30 axes) Note: repeater required for 15 or more axes. |
MECHATROLINK specifications
| M-Ⅰ | M-Ⅱ | |||
|---|---|---|---|---|
| 17-byte | 17-byte | 32-byte | ||
| Command | Servo | - | × | - |
| Stepping Motor Drivers | - | - | - | |
| Intelligent I/O | - | - | - | |
| Simple I/O | - | - | - | |
| Inverter | - | - | - | |
| Transmission cycle | 1ms, 2ms, 4ms | |||
Contact Information
ALGOSYSTEM CO., LTD.
| 656 Kobirao, Mihara-ku, Sakai, Osaka 587-0021, Japan TEL: +81-72-362-5067 FAX: +81-72-362-4856 |