- CNC System
-
MDevice 컨트롤러
Category：
（★） -
MECHATROLINK Spec
M-II M-III M-4
Shenyang Golding NC Tech. Co. Ltd.
GJ-210 is a high-performance CNC system, can be used to control lathe, miller and machining center:
- Open architecture based on IPC
Specifications
| Item | Specifications |
|---|---|
| Control method | Motion control by MECHATROLINK-Ⅱ (Position) |
| Number of control axis | 4 axes, maximum 5 axes |
| Control Servo Drivers | MECHATROLINK-Ⅱ ; SGDS series, SGDH series +JUSP-NS115 |
| Unit (minimum control unit) | 0.0001,0.0001 (unit: mm,deg) |
| Maximum command value | −2147483648 to 2147483647 pulses (signed 32-bit data) unlimited feed also possible |
| Motion program functions | Positioning, Liner Interpolation, Circular Interpolation, Zero point search, Time constance positioning, Line action, Electric gear, Following synchronization, Velocity command, Torque command, Small segment continuously processing function |
| Rapid traverse feed rate | 1 to 2147483647 [command unit/min] |
| Interpolation traverse feed rate | 1 to 2147483647 [command unit/min] |
| Override | 0.00 to 327.67% (command unit0.01%, possible to set by axis or task) |
| Accel/Decel control | Accel, Decel tim: Maximum 60.000ms (trapezoid, exponential and S curve), S curve Constance: Maximum 30.000ms |
MECHATROLINK specifications
| M-Ⅰ | M-Ⅱ | |||
|---|---|---|---|---|
| 17-byte | 17-byte | 32-byte | ||
| Command | Servo | - | × | × |
| Stepping Motor Drivers | - | - | - | |
| Intelligent I/O | - | - | - | |
| Simple I/O | - | - | - | |
| Inverter | - | - | - | |
| Transmission cycle | 2ms | 1ms, 1.5ms, 2ms | ||
Contact Information
Shenyang Golding NC Tech. Co. Ltd.
| No.16, East Nanping Road, Hunnan High-tech. Industrial Development Zone, Shenyang, 110171 PRC TEL: +86-24-2469-6018 FAX: +86-24-2469-6000 |