PCI-bus Host controller board MLH20-1030

File size　13.8MB

MYCOM, INC.Updated on：Apr 4, 2019

Available to control up to maximum 30 modules corresponding to MECHATROLINK-Ⅱ.
One controller board can control maximum 30 modules such as stepping motor and servomotor corresponding to MECHATROLINK-Ⅱ.
Wiring saving is available.
Complicated wring is unnecessary. Low cost and simple system construction are available.
One package control of modules corresponding to MECHATROLINK-Ⅱ is available.
Available to Control parameter, motion program and so on by one package.
Device driver+DLL (VisualC++) and driving sample software (optional) are prepared.
Available to control maximum 2 boards.

MLH20-1030

Download

Item	specifications
Bus specification	PCI Bus
Communication type	MECHATROLINK-Ⅱ conformity
Control target	Device corresponding to MECHATROLINK-Ⅰ/Ⅱ
Numbers of control module	Maximum 30 modules
External I/F	MECHATROLINK-Ⅱ communication port	1 ch.
	2 Inputs (Start, Emergency stop)	Input circuit: Photo coupler Control capacity: Less than 10mA at most, External input power DC24V use
	1 Output (RDY)	Output circuit: Photo coupler Control capacity: Less than 10mA at most, External Output power DC24V use
PC side source for use.	Memory space	Occupies 256 byte (100H) from base address assigned by PCI configuration.
	I/O space	Occupies 4 byte (04H) from base address assigned by PCI configuration.
	Interrupt I/F	Uses one IRQ assigned by PCI configuration.
Power	Bus logic power	+5VDC ±1.0A or less
Power	Power for sensor I/F	+24VDC (supplied externally) 0.1A or less
Board size	64.0mm (H) × 120.0mm (W) × 20.0mm (D)
Mass	55 g

MYCOM, INC.

Head Office	1-29, Ohara, Goryo, Nishikyo, Kyoto 651-8245, Japan TEL: +81-75-382-1580 FAX: +81-75-382-1570
Tokyo Office	1-8 Suda-cho, kanda, Chiyoda-ku, Tokyo 101-0047, Japan TEL: +81-3-3251-5415 FAX: +81-3-3251-5485
Singapore	TEL: +65-6743-4476 FAX: +65-6743-4576
Taiwan	TEL: +886-2-2778-9021 FAX: +886-2-2778-9750