High-Accuracy Position Sensors K1G-C04M

传感器

The controller, K1G-C04M supports MECHATROLINK-Ⅲ.__RCMS_CONTENT_BOUNDARY__It achieves high-speed at a baud rate of 100 Mbps and high-reliability communications, furthermore, realizes the synchronous communication.__RCMS_CONTENT_BOUNDARY__Only two wires are required between the PC/PLC and the K1G-C04M for wiring. You can reduce greatly wiring time and save space.__RCMS_CONTENT_BOUNDARY__Using the Pro-face GP4000 series allows the setting and checking of a parameters used by the K1G series.__RCMS_CONTENT_BOUNDARY__The Pro-face Remote HMI allows the setting and checking of parameters using a Wi-Fi-equipped tablet.__RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY__

Catalog listing K1G-C04/K1G-C04G K1G-C04M/K1G-C04MG Compatible sensor K1G-S□□ Max. number of connected sensors 4 Reading Min. display unit 0.1 μm Display range With K1G-S07 0 to 7 mm -3.5 to +3.5mm can be selected With K1G-S15 0 to 15 mm -7.5 to +7.5mm can be selected Measurement cycle (Output update cycle) 250μm/500μm/1ms (switchover) Analog output 4 outputs: 4-20 mA or 1-5 V (all outputs are switched over at once) - Digital output 8 outputs: NPN or PNP transistor (all outputs are switched over at once) - Digital input 4 inputs: non-voltage contacts and NPN or PNP open collector (all points are switched over at once) - Communications RS-485 (Modbus RTU) MECHATROLINK-Ⅲ Supply power DC12 to 24±10% Operating temperature 0 to 50°C (0 to 35°C if gang-mounted) Storage temperature -20 to 70°C (without freezing) Operating humidity 30 to 85 % RH (without condensation) Vibration resistance 2m/s2 (10 to 60 Hz), 2 h each in X, Y, and Z directions Protection circuit Power reverse connection protection