AC Servo System VCⅡ series

伺服驱动器

Auto notch filter to improve the efficency for the esonance control operation__RCMS_CONTENT_BOUNDARY__4 kinds of Gain selction functions to choose the suitable gain to match with the load condition__RCMS_CONTENT_BOUNDARY__Effective resonance control filter function to control resonance at the distal end of machine.__RCMS_CONTENT_BOUNDARY__Smooth startup can be done by using the special data edting software with opration function, monitoring, editing, and analysis function__RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY__

Item Specifications MECHATROLINK Conmmunication Behavioral specification Position control by MECHATROLINK-Ⅲ communication Command input MECHATROLINK-Ⅲ command (Alarm/Warning readout, Interpolation feeding, Positioning, etc.) Output capacity (Input power source) 50 to 200W (AC100V to 115V 50/60Hz Single phase) 0.1 to 37kW (AC200V to 230V 50/60Hz 3-phase) 0.26 to 55kW (AC400 to 460V 50/60Hz 3-phase) Number of control axes Single axis Control input signal Number of channels 4 points (see “Note”) Function Emergency stop*, Zero point deceleration, Speed over ride, Positive/Negative over travel* Control output signal Number of channels 4 points Allocating to each signals (see “Note”) Function Servo ready, Alarm (*), Warning (*), Positioning complete, Speed zero, Torque limiting, Brake release, Soft limit switch, Marker output, Speed/Torque/Rough positioning/Pulse train mode running Auto tuning functions Possible to tune for the case with relatively large inertia ratio by parameter setting Gain selection fuctions • 4 kinds of gain selection are possible by High-level controller • Capable to correspond to the position loop gain for the Gain selection