MECHATROLINK MODULE for DL06 series
D0-MLINK

控制器

Achieved the motion control function using the small size PLC.__RCMS_CONTENT_BOUNDARY__Enabled DL06 to be used as a motion controller. (Scheduling to execute by DL05)__RCMS_CONTENT_BOUNDARY__By installing D0-MLINK, it is possible to connect easily with various actuators ; such as the servo motor and the stepping motors as well as I/O equipment. In addition, the motion system for the wiring-saving can be constructed.__RCMS_CONTENT_BOUNDARY__Positioning of seven independent axes can be executed with DL06.
(DL05 is scheduled to execute up to two independent axes.)__RCMS_CONTENT_BOUNDARY__Only setting the parameter in the data register of PLC, high accuracy positioning can be achieved easily and at low cost.__RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY__

Item Specifications Function MECHATROLINK Master Control method MECHATROLINK-Ⅰ ：4Mbps MECHATROLINK-Ⅱ ：10Mbps Number of Axis to control DL06：7axes DL05：2axes (Being scheduled) Transmission distance The maximum total extension 50m Minimum distance between stations 0.5m Data transmission method Transmitting / receiving the data through the data register. Transmission: Setting the data by the ladder program. (command to each axis) Receiving: D0-MLINK sets the status of each axis in the data register. Number of stations to connect DL06: Up to seven slave stations DL05: Up to two slave stations. (Being scheduled)