PCI-bus Host controller board MLH20-1030

控制器

Available to control up to maximum 30 modules corresponding to MECHATROLINK-Ⅱ.
One controller board can control maximum 30 modules such as stepping motor and servomotor corresponding to MECHATROLINK-Ⅱ.__RCMS_CONTENT_BOUNDARY__Wiring saving is available.
Complicated wring is unnecessary. Low cost and simple system construction are available.__RCMS_CONTENT_BOUNDARY__One package control of modules corresponding to MECHATROLINK-Ⅱ is available.
Available to Control parameter, motion program and so on by one package.__RCMS_CONTENT_BOUNDARY__Device driver+DLL (VisualC++) and driving sample software (optional) are prepared.
Available to control maximum 2 boards.__RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY____RCMS_CONTENT_BOUNDARY__

Item specifications Bus specification PCI Bus Communication type MECHATROLINK-Ⅱ conformity Control target Device corresponding to MECHATROLINK-Ⅰ/Ⅱ Numbers of control module Maximum 30 modules External I/F MECHATROLINK-Ⅱ communication port 1 ch. 2 Inputs (Start, Emergency stop) Input circuit: Photo coupler Control capacity: Less than 10mA at most, External input power DC24V use 1 Output (RDY) Output circuit: Photo coupler Control capacity: Less than 10mA at most, External Output power DC24V use PC side source for use. Memory space Occupies 256 byte (100H) from base address assigned by PCI configuration. I/O space Occupies 4 byte (04H) from base address assigned by PCI configuration. Interrupt I/F Uses one IRQ assigned by PCI configuration. Power Bus logic power +5VDC ±1.0A or less Power for sensor I/F +24VDC (supplied externally) 0.1A or less Board size 64.0mm (H) × 120.0mm (W) × 20.0mm (D) Mass 55 g