1. HOME
  2. Product
  3. PCI Express MECHATROLINK-Ⅲ Interface Card

Products

  • PCI Express MECHATROLINK-Ⅲ Interface Card
  • Master Controller

    Category:
    (★)
  • MECHATROLINK Spec
    M-II M-III

SYSTEC CorporationUpdated on:Apr 4, 2019

  • By connecting to a PCI Express slot (PC, etc.) with a dedicated MECHATROLINK-Ⅲ communication driver, a PC based High-Speed and High-Performance control can be achieved.
  • The Cyclic Communication of MECHATROLINK-Ⅲ ASIC is automatically controlled by FPGA.
  • The Command/Response data between PC and MECHATROLINK-Ⅲ ASIC is automatically transmitted by the DMA function of the FPGA. (Using a dedicated library for automatic transfer)
  • Supports Master/Slave External Synchronization.
  • API library for INtime is separately provided.
  • Support up to 62 node connection / 62 axis controls. (The maximum number of connection depends on the host application)

SY-M3-01

Download

Specifications

Item Specifications
Bus standard Gen1×1 PCI Express bus
Communication MECHATROLINK-Ⅲ Master (C1 Master)
No. of MECHATROLINK channels 1 (IMI Connector×2)
External synchronization With optional connector, 1 master can control 5 slaves.
Supported OS INtime5 or later
Power supply 12V (PCI Express slot power)
Board size 130mm × 69mm (Supports Low Profi le bracket)

MECHATROLINK specifications

  M-Ⅲ
16-byte 32-byte 48-byte 64-byte
Profile Standard servo - × × -
Standard I/O × × × ×
Standard Stepping Motor Drivers - × × -
Standard Inverter - × - ×
Transmission cycle 31.25 μs to 8ms 62.5 μs to 8ms

Contact Information

SYSTEC Corporation

1-9-9 Shin-Miyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 Japan
TEL: +81-053-428-4931 FAX: +81-053-428-4310

E-mail:sys-ip@systec.co.jpURL:http://www.systec.co.jp/