- Network Converter for Controlled Motors NETC01-M2
-
Slave Stepping Motor Drive
-
MECHATROLINK Spec
M-II M-III M-4
ORIENTAL MOTOR Co.,Ltd.Updated on：Jan 6, 2022
NETC01-M2 converts MECHATROLINK-Ⅱ communication protocol to RS-485 communication protocol.
With NETC01-M2, you can transparently control up to 16 of our RS-485 products by intelligent I/O commands from a MECHATROLINK-Ⅱ master.
In addition to stepping motors, wide variety of products such as sliders, cylinders, and blushless motors will be able to connect to NETC01-M2 in the future.
Specifications
| Item | Specifications | |
|---|---|---|
| Baud Rate | 10Mbps | |
| Communication Cycle | 0.5ms / 1.0ms / 1.5ms / 2.0ms / 2.5ms / 3.0ms / 3.5ms / 4.0ms / 8.0ms | |
| Station Address | 60h to 7Fh | |
| Corresponding Profile | Intelligent I/O | |
| RS-485 Communication Specification | Electric characteristics | In conformance with EIA-485 |
| Baud Rate | 625kbps | |
| Physicallayer | Asynchronous mode (8 bits, 1 stop bit, no parity) | |
| Protocol | GW Protocol Ver.2 (Open protocol established by ORIENTAL MOTOR Co.,Ltd.) | |
| Connection pattern | 16 units Max. | |
MECHATROLINK specifications
| M-Ⅰ | M-Ⅱ | |||
|---|---|---|---|---|
| 17-byte | 17-byte | 32-byte | ||
| Command | Intelligent I/O | × | × | × |
| Transmission cycle | 2.0ms | 0.5ms, 1.0ms, 1.5ms, 2.0ms, 2.5ms, 3.0ms, 3.5ms, 4.0ms, 8.0ms | ||
Contact Information
ORIENTAL MOTOR CO.,Ltd.
| 4-8-1 Higashiueno,Taito-ku,Tokyo 110-8536 Japan TEL: +81-3-6744-0351 FAX: +81-3-5826-2575 |