2. 适用产品
  3. High-Accuracy Position Sensors K1G-C04M


  • High-Accuracy Position Sensors K1G-C04M
  • 子站 传感器

    M-II M-III M-4

阿自倍尔株式会社Updated on:Apr 4, 2019

  • The controller, K1G-C04M supports MECHATROLINK-Ⅲ.
  • It achieves high-speed at a baud rate of 100 Mbps and high-reliability communications, furthermore, realizes the synchronous communication.
  • Only two wires are required between the PC/PLC and the K1G-C04M for wiring. You can reduce greatly wiring time and save space.
  • Using the Pro-face GP4000 series allows the setting and checking of a parameters used by the K1G series.
  • The Pro-face Remote HMI allows the setting and checking of parameters using a Wi-Fi-equipped tablet.




Catalog listing K1G-C04/K1G-C04G K1G-C04M/K1G-C04MG
Compatible sensor K1G-S□□
Max. number of connected sensors 4
Reading Min. display unit 0.1 μm
Display range With K1G-S07 0 to 7 mm -3.5 to +3.5mm can be selected
With K1G-S15 0 to 15 mm -7.5 to +7.5mm can be selected
Measurement cycle
(Output update cycle)
250μm/500μm/1ms (switchover)
Analog output 4 outputs: 4-20 mA or 1-5 V
(all outputs are switched over at once)
Digital output 8 outputs: NPN or PNP transistor
(all outputs are switched over at once)
Digital input 4 inputs: non-voltage contacts and NPN or PNP open collector (all points are switched over at once) -
Communications RS-485 (Modbus RTU) MECHATROLINK-Ⅲ
Supply power DC12 to 24±10%
Operating temperature 0 to 50°C (0 to 35°C if gang-mounted)
Storage temperature -20 to 70°C (without freezing)
Operating humidity 30 to 85 % RH (without condensation)
Vibration resistance 2m/s2 (10 to 60 Hz), 2 h each in X, Y, and Z directions
Protection circuit Power reverse connection protection

MECHATROLINK specifications

Profile Standard I/O
Data size 32byte, 48byte
Transmission cycle 0.25/0.5/1-64 ms [Selectable by 0.5ms]

Contact Information

Azbil Corporation Advanced Automation Company

Marketing Dept., Sensor Group2, 1-12-2, Kawana, Fujisawa-shi, Kanagawa-ken, 251-8522, Japan
TEL: +81-466-20-2232 FAX: +81-466-20-2193